Spanner
Wrench / Deck Plate Key
SW-2531
SW-2531
Among
the features of ARG, SS, SD and BVS series strainers are provisions on
the strainer cap for the use of a spanner wrench to tighten or loosen
the cap before or after maintenance.
Hand-tight is sufficient for a good seal for GROCO strainers with threaded caps, but some boaters may prefer to “snug” the cover beyond hand-tight.
NOTE: Do not use SW-2531 to tighten non-metallic caps.
-
Cast bronze with 1/4” and 5/16” stainless steel pins.
-
Opens to service deck plates or strainer caps with key holes up to 7” apart.
-
Hangs conveniently near the strainer(s) location.
-
Individually boxed.
-
Package quantity is nine (9).