155
Series
155 Series - SweetTank™ Compatible
155 Series waste macerator pumps make fast work (17 GPM) of holding tank pump-out.
Sizes are available to fit any rigid holding tank (36" maximum depth, 1-inch increments), and since waste is macerated BEFORE it leaves the tank, smaller hose and overboard seacock (3/4") may be used in the discharge line.
New
pump installations require GROCO® #MP Hardware (tank hardware
kit), ordered separately.
SERVICE
NOTE:
155 Series will fit the same mounting used for discontinued MPT or MPS Series macerator pumps.
155 Series will fit the same mounting used for discontinued MPT or MPS Series macerator pumps.
HOW TO ORDER
Determine tank depth in inches, as measured from the
top outside to the bottom inside.
Order
155-61XX-YY
(XX = tank
depth)
(YY = voltage)